Landscaping screw range has been specifically design for the construction of decking, stairs, fencing, roofing and landscaping work.
C2 Decking Screws
The innovative design of the C2 Timber Decking Screw, rapidly penetrates the timber, cleanly countersinking and clamping the board to the joist.
|Code||Recess type ||Colour/Plating |
|50C2D250||TX Drive||Organic Green |
|65C2D250||TX Drive||Organic Green|
|75C2D250||TX Drive||Organic Green|
|65C2D1000||TX Drive ||Organic Green|
A2 Classic Decking Screw Stainless Steel
TIMco Classic A2 Stainless Steel decking screws are designed for the construction of decking platforms. It has a reduced head diameter to fit in grooves of decking and is a double countersunk to assist with self-countersinking.
The Helix on the shank of the screw is designed to help clean the hole of debris and is partiallly threaded to increase clamping effectiveness. The 40 degree single thread provides a secure fixing with high pull-out resistance, and the type 17 slash enables low torque and reduce timber splitting at low edge distances with a 25 degree sharp point for easier penetration into all wood types.
The Classic decking screws carry the CE mark in compliance with the construction products regulations.
|Code||Size (mm) |
|50DEXSS250||4.5 X 50|
|65DEXSS250||4.5 X 65|
Solo Decking Screw
The Solo Decking Screw is an economic softwood decking screw that combines high clamping results with rapid installation.
|Code||Size (mm)||Recess Type||Colour/Plating|
|50SOLOD200||4.5 X 50||Cross-recess||Organic green|
|60SOLOD200||4.5 X 60||Cross-recess||Organic green|
|70SOLOD200||4.5 X 70||Cross-recess||Organic green|
|60SOLOD1000||4.5 X 60||Cross-recess ||Organic green|
In-Dex Decking Screws
Used for attaching decking board to a timber substrate. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.
|Code||Size (mm) ||Colour/Plating |
|65DEXB1000||4.5 X 65||Organic Green |
|75DEXSS250||4.5 X 75||A2 Stainless Steel |
|75DEXSS500||4.5 X 75||A2 Stainless Steel|
In-Dex Timber Framing Screw
Designed as an alternative to the traditional Coach screws mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.
Also available with a wafer head for improved clamping or a low profile finish.
|Code||Size (mm)||Head Type||Colour/Plating|
|60IN||6.7 X 60||–||Olive green|
|75IN||6.7 X 75||–||Olive green|
|87IN||6.7 X 87||–||Olive green|
|100IN||6.7 X 100||– ||Olive green|
|125IN||6.7 X 125||Hex||Olive green|
|150IN||6.7 X 150||Hex||Olive green|
|200IN||6.7 X 200||Hex||Olive green|
|95INW||6.7 X 95||Hex||Olive green|
|125INW||6.7 X 125||Wafer||Olive green|
|150INW||6.7 X 150||Wafer||Olive green|
|175INW||6.7 X 175||Wafer||Olive green|
|200INW||8.0 X 200||Wafer||Olive green|
|225INW||8.0 X 225||Wafer||Olive green|
|250INW||8.0 X 250||Wafer||Olive green|
|275INW||8.0 X 275||Wafer||Olive green|
|300INW||8.0 X 300||Wafer||Olive green|
|350INW||8.0 X 350||Wafer||Olive green|
|400INW||8.0 X 400||Wafer||Olive green|
|75INDEXSST||6.7 X 75||Hex||A4 Stainless Steel|
|100INDEXSST||6.7 X 100||– ||A4 Stainless Steel |
|125INDEXSST||6.7 X 125||Hex||A4 Stainless Steel|
|150INDEXSST||6.7 X 150||– ||A4 Stainless Steel |
|80INDEXWSS||8.0 X 80||Hex||A4 Stainless Steel|
In-Dex External Coach Screws
TIMco IN-Dex exterior coach screws are designed for roofing and landscaping. They have an olive green plating to withstand up to 500 hours (min) salt spray and have an added patented molecular lubrication to increase insertion speed.
A pilot hole maybe required when being used with certain hardwoods.
|Code||Thread length (mm)||A/F (mm)|
|640INCSB||6 x 40||10|
|650INCSB||6 x 50||10|
|675INCSB||6 x 75||10|
|850INCSB||8 x 50||13|
|875INCSB||8 x 75||13|
|8120INCSB||8 x 1200||13|
|10100INCSB||10 x 100||17|
|10150INCSB||10 x 150||17|
In-Dex External Carriage Bolts
TIMco IN-Dex exterior carriage bolts are designed for fencing, roofing and landscaping.
They have an olive green plating to withstand up to 500 hours (min) salt spray and have an added patented molecular lubrication to increase insertion speed.
|Code||Thread length (mm)||Nut size||Colour/Plating||A/F (mm)|
|10100INCB||10 X 100||M10||Olive green||17|
|10150INCB||10 X 150||M10||Olive green||17|
|10160INCB||10 X 160||M10||Olive green||17|
|10200INCB||10 X 200||M10||Olive green||17|
|10220INCB||10 X 220||M10||Olive green||17|