Skip to main content

KAL Fixings Limited

SALES & ENQUIRIES

HEAD OFFICE Tel:01223 832591

BIRMINGHAM OFFICE Tel: 0121 296 8002 / 8003

Screwdriver Sets

Seriously high quality VDE electricians Slotted & Pozi screwdriver set for working easier, faster & safer.

  • Fully rated VDE to 1,000v.
  • Individually tested to 10,000v. EN 60900:2004.
  • Anti-slip Lasertips significantly reduce the required effort & ergonomically designed handles allow comfortable intensive use.
  • Special high grade steel blades dramatically extend service life.
  • The Kraftform handle is impervious to all workshop fluids.
  • Also includes workshop storage rack.
  • Lasertip technology burns a micro-grip on the tip of the screwdriver for anti-slip and safer tightening.
  • Kraftform ergonomic 3 component handles; comfort, grip & power.
  • Highly durable "bit material" blades for extreme wear resistance & very long service life.
  • Anti-roll handle prevents the screwdriver falling off work surfaces.

Kraftform Plus Series 100 VDE

Wera logo

160i/165i Kraftform Plus Series 100 VDE Screwdriver Sets

Wera Rack Screwdriver Set Kraftform Plus Series 100, Voltage Tester and Rack. 7 piece set and rack in display carton Slotted and Pozidriv screws.

Contains:
165 i PZ VDE Insulated Pozi, (1 x PZ 1x80, 1 x PZ 2x100)
160 i VDE Insulated Slot, (1 x 0.4x2.5x80, 1 x 0.6x3.5x100, 1 x 0.8x4.0x100, 1 x 1.0x5.5x125)
247 Single-pole voltage tester (1 x 0.5x3.0x70)

Code Size Box Qty
WER006148 7 PIECE 1

Kraftform Kompakt VDE

Wera logo

Kraftform Kompakt VDE 60i/62i/65i/247/18 Sets

Kraftform Kompakt VDE 60 i/62 i/65 i/247/18 in textile pouch.

  • Insulated handle and insulated interchangable blades.
  • Blades exchanged without any special tools.
  • Tested in water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900).
  • Guaranteed safe working at their maximum permitted load of 1,000 volts.
  • Compactly and protectively housed in light, robust textile pouch.
  • Use Wera VDE interchangeable blades only.

Contains:
817 VDE Kraftform blade-holding handle (1 x 9x102)
KK 62 i Phillips (1 x PH 1x154, 1 x PH 2x154)
KK 62 i PH/S PlusMinus slotted/phillips (1 x # 1x154, 1 x # 2x154)
KK 65 i PZ Pozidriv (1 x PZ 1x154, 1 x PZ 2x154)
KK 65 i PZ/S PlusMinus slotted/pozidriv (1 x # 1x154, 1 x # 2x154)
KK 60 i Slotted (1 x 0.4x2.5x154, 1 x 0.6x3.5x154, 1 x 0.8x4.0x154, 1 x 1.0x5.5x154)
KK 96 VK 6.3 Switch cabinet key, glass-fibre reinforced (1 x 6.3x89)
KK 97 VK 8.1 Switch cabinet key, glass-fibre reinforced (1 x 8.1x89)
KK 98 DK Switch cabinet key, glass-fibre reinforced (1 x 89mm)
KK 99 FL Switch cabinet key, glass-fibre reinforced (1 x 89mm) 247 Single-pole voltage tester (1 x 0.5x3.0x70)

Code Size Box Qty
WER003471 18 PIECE 1

Kraftform Plus Screwdriver Set Series 900

Wera logo

932/318/6 Kraftform Plus Screwdriver Set – Series 900 – PZ/Sl

Wera Screwdriver Set Kraftform Plus Series 900: Chiseldriver and Rack. 6 piece set and rack in display carton.

  • Seriously high quality heavy duty screwdriver set for working easier, faster & safer.
  • The handles with a striking cap contain shock absorbers to allow comfortable use.
  • Fully hardened blades dramatically increase service life.
  • Wera Chiseldriver can be hit with a hammer and due to the high quality blade it can still be used as a screwdriver.
  • Kraftform handle is impervious to all workshop fluids.
  • Kraftform ergonomic 3 component handles; comfort, grip & power
  • Impact cap for striking the Chiseldriver
  • Shock absorbing handle for comfortable and safe use
  • Highly durable "bit material" blades for extreme wear resistance & very long service life
  • Hexagonal bolster for use with a spanner to give even more torque

Contains:
918 SPZ (1 x PZ 1x80, 1 x PZ 2x100 932 A (1 x 0.6x3.5x80, 1 x 0.8x4.5x90, 1 x 1.0x5.5x100, 1 x 1.2x7.0x125)

Code Size Box Qty
WER018287 6 PIECE 1

Kraftform Plus Screwdriver Set Series 300 TX

Wera logo

367/6 Kraftform Plus Screwdriver Set – Series 300 – TX

Wera Screwdriver Set Kraftform Plus Series 300 Torx and Rack. 6 piece set and rack in display carton.

  • A set of 6 high quality Torx screwdrivers.
  • Each screwdriver is made to the highest standard and built to last.
  • Precision manufactured tips give an exact fit to the screw.
  • High grade steel blades are used for extended service life.
  • Truly ergonomic handles allow extra power and grip, especially over long periods.
  • The Kraftform handle is impervious to all workshop fluids.
  • Kraftform ergonomic 3 component handles; comfort, grip & power Highly durable "bit material" blades for extreme wear resistance & very long service life
  • Anti-roll handle prevents the screwdriver falling off work surfaces.
  • Profile & size markings for correct tool selection

Contains:
367 TORX (1 x TX 10x80, 1 x TX 15x80, 1 x TX 20x100, 1 x TX 25x100, 1 x TX 30x115, 1 x TX 40x130)

Code Size Box Qty
WER028062 6 PIECE 1

Kraftform Plus Nutdriver Set Series 300

Wera logo

395 HO/7 SM Kraftform Plus Nutdriver Set – Series 300

Nutdriver 7 piece Set in display carton.

  • Seriously high quality general purpose nutdriver set for working easier, faster & safer with hexagon headed bolts, screws and nuts.
  • The hollow shaft enables seized screws or those on long threads to be tightened and loosened.
  • The hard-zones reduce friction allowing a high-speed action whilst the soft zones help avoid strain and injury during high torque transfer.
  • Nutdriver for hexagon headed bolts, screws and nuts Hollow shaft for jobs involiving threaded rods.
  • Kraftform ergonomic 3 component handles; comfort, grip & power.
  • Anti-roll handle prevents the screwdriver falling off work surfaces.

Contains:
395 HO (1 x 5.0x70, 1 x 5.5x70, 1 x 6.0x70, 1 x 7.0x80, 1 x 8.0x80, 1 x 10.0x80, 1 x 13.0x80)

Code Size Box Qty
WER029510 7 PIECE 1

Kraftform Plus Nutdriver Set - Series 300 PH/PZ/SL

Wera logo

335/350/355/6 Kraftform Plus Nutdriver Set – Series 300 – PH/PZ/SL

Wera Screwdriver Set Kraftform Plus Series 300 Lasertip and Rack. 6 piece set and rack in display carton.

  • Seriously high quality general purpose Slotted, Phillips & Pozi screwdriver set for working easier, faster & safer.
  • Special high grade steel blades dramatically increase service life.
  • The Kraftform handle is impervious to all workshop fluids.
  • Lasertip technology burns a micro-grip on the tip of the screwdriver for anti-slip and safer tightening.
  • Kraftform ergonomic 3 component handles; comfort, grip & power Highly durable "bit material" blades for extreme wear resistance & very long service life
  • Anti-roll handle prevents the screwdriver falling off

Contains:
350 PH (1 x PH 1x80, 1 x PH 2x100)
355 PZ (1 x PZ 1x80, 1 x PZ 2x100)
335 (1 x 0.8x4.0x100, 1 x 1.0x5.5x125)

Code Size Box Qty
WER105622 6 PIECE 1

Kraftform Kompakt 20

Wera logo

Kraftform Kompakt 20

Kraftform Kompakt 20 with pouch.

  • A new generation in service tools.
  • Specially developed for mobility, flexibility and versatility.
  • This series offers both power and hand screwdriving capabilities.
  • In high quality Velcro® fastening belt loop pouch, carrying this tool is easy.
  • 6 high quality 25mm screwdriver bits with one quick release bit holding handle.
  • The screwdriver bits held in a compartment inside the handle.
  • The Rapidaptor bit holder can be ejected for use in a power tool (non-impact).
  • Kraftform ergonomic 3 component handle; comfort, grip & power
  • Rapidaptor bit holder securely holds screwdriver bits
  • Rapidaptor technology; Bit lock & one handed bit replacement
  • Highly durable, premium quality bits for extreme wear resistance & very long service.

Contains:
889/4 R Rapidator Universal Bit Holder 1/4"x100
851/1 Z PH (1 x PH 1x25, PH 1 x 2x25)
855/1 Z PZ (1 x PZ 1x25, 1 x PZ 2x25)
800/1 Z (1 x 1.0x5.5x25, 1 x 1.2x6.5x25)

Code Size Box Qty
WER051021 7 PIECE 1

Kraftform Kompakt 60

Wera logo

Kraftform Kompakt 60

Kraftform Kompakt 60 with pouch.

  • A new generation in service tools.
  • Specially developed for mobility, flexibility and versatility.
  • This series offers both power and hand screwdriving capabilities.
  • In high quality Velcro® fastening belt loop pouch, carrying this tool is easy.
  • 16 high quality 89mm long screwdriver bits with a quick release bit holding handle.
  • Wera's Hex screwdriver bits feature the patented Hex-Plus® profile.
  • User can apply up to 20% more torque without damaging the fastener.
  • Kraftform ergonomic 3 component handle; comfort, grip & power.
  • Rapidaptor bit holder securely holds screwdriver bits.
  • Rapidaptor technology; Bit lock & one handed bit replacement.
  • Highly durable, premium quality bits for extreme wear resistance & very long service life.
  • Screwdriver bits can also be used in power tools (non-impact).

Contains:
816 R Kraftform bitholding screwdriver with Rapidator quick release chuck 1/4"x119
851/4 Z PH (1 x PH 1x89, 1 x PH 2x89, 1 x PH 3x89)
855/4 Z PZ (1 x PZ 1x89, 1 x PZ 2x89, 1 x PZ 3x89)
867/4 Z TORX BO (1 x TX 10x89, 1 x TX 15x89, 1 x TX 20x89, 1 x TX 25x9, 1 x TX 30x89)
800/4 Z (1 x 1.0x5.5x89)
840/4 Z Hex-Plus (1 x 3.0x89,1 x 4.0x89, 1 x 50x89, 1 x 6.0x89)

Code Size Box Qty
WER059295 17 PIECE 1

Kraftform Kompakt 62

Wera logo

Kraftform Kompakt 62

Kraftform Kompakt 62 with pouch.

  • Compact 33 piece screwdriver and bit set. 
  • This set contains 32x 89mm high grade steel, long & hard wearing screwdriver bits with a Kraftform screwdriver handle.
  • Bits can be used in power tools or by hand using the quick release handle system.
  • The Kraftform handle is impervious to all workshop fluids.
  • Compact set, ideal for maintenance teams and security applications.
  • Reduces the amount of tools needed to carry on site.
  • Huge range of tip profiles Patented Kraftform quick release bit holding handle.
  • Kraftform ergonomic 3 component handles; comfort, grip & power.
  • Premium bits are precision manufactured for a perfect fit and long service life.

Contains:
816 R Kraftform bitholding screwdriver with Rapidaptor quick release chuck 1/4"x119
857/4 Spanner Bits (1 x 4x89, 1 x 6x89, 1 x 8x89, 1 x 10x89)
851/4 Z PH (1 x PH 1x89, 1 x PH 2x89, 1 xPH 3x89)
855/4 Z PZ (1 x PZ 1x89, 1 x PZ 2x89, 1 x PZ 3x89)
867/4 Z TORX BO (1 x TX 8x89, 1 x TX 10x89, 1 x TX 15x89, 1 x TX 20x89, 1 x TX 25x89, 1 x TX 27x89, 1 x TX 30x89, 1 x TX 40x89)
800/4 Z (1 x 1.2x6.5x89)
840/4 Z Hex-Plus BO (1 x 2.0x89, 1 x 2.5x89, 1 x 3.0x89, 1 x 4.0x89, 1 x 5.0x89, 1 x 6.0x89)
871/4 TORQ-SET Mplus (1 x 6x89, 1 x 8x89, 1 x 10x89)
875/4 TR-WING (1 x 1x89, 1 x 2x89, 1 x 3x89, 1 x 4x89)

Code Size Box Qty
WER059297 33 PIECE 1

Kraftform Kompakt 41

Wera logo

Kraftform Kompakt 41

Kraftform Kompakt 41 with pouch.

  • A new generation in maintenance tools.
  • Specially developed for mobility, flexibility and versatility.
  • This series offers both power and hand screwdriving capabilities.
  • In high quality Velcro® fastening belt loop pouch, carrying this tool is easy.
  • 10 high quality 89mm long screwdriver bits with a quick release bit holding handle.
  • Kraftform ergonomic 3 component handle; comfort, grip & power.
  • Compact pouch reduces weight and space.
  • Quick-release bit holder locks bit in place.
  • Hard wearing & longer life due to the unique precision hardening process.
  • Screwdriver bits can also be used in power tools (non-impact).

Contains:
816 R Kraftform bitholding screwdriver with Rapidator quick release chuck 1/4"x119
851/4 Z PH (1 x PH 1x89, 1 x PH 2x89, 1 x PH 3x89)
855/4 Z PZ (1 x PZ 1x89, 1 x PZ 2x89, 1 x PZ 3x89)
867/4 Z TORX BO (1 x TX 15x89, 1 x TX 20x89, 1 x TX 25x89, 1 x TX 30x89)

Code Size Box Qty
WER059299 11 PIECE 1

Kraftform Kompakt 50

Wera logo

Kraftform Kompakt 50

Kraftform Kompakt 50 in plastic box.

Contains:
817 R Bitholding screwdriver with Rapidator quick release chuck 1/4"x133
889/4 R Rapidator Universal Bit Holder 1/4"x100
851/1 Z PH (1 x PH 1x25, 1 x PH 2x25)
855/1 Z PZ (1 x PZ 1x25, 1 x PZ 2x25)
867/1 Z TORX BO (1 x TX 10x25, 1 x TX 15x25, 1 x TX 20x25, 1 x TX 25x25, 1 x TX 30x25, 1 x TX 40x25)
800/1 Z (1 x 0.6x4.5x25, 1 x 1.0x5.5x25)

Code Size Box Qty
WER056656 14 PIECE 1