Diamond Cores
Addax has a wide range of dry diamond core bits for the drilling of clean holes in general building materials.
Dry Diamond Core Bits
Manufactured using laser-welded technology, these cores have been specifically designed to drill large clean holes in masonry and concrete block.
MUST BE USED ON ROTARY MODE ONLY.
| Code | Segment height (mm) | Drill size (mm) | Length (mm) |
|---|---|---|---|
| GPCP22300 | 10 | 22 | 300 |
| GPCP28300 | 10 | 28 | 300 |
| GPCP32150 | 10 | 32 | 150 |
| GPCP38150 | 10 | 38 | 150 |
| GPCP48150 | 10 | 48 | 150 |
| GPCP52150 | 10 | 52 | 150 |
| GPCP65150 | 10 | 65 | 150 |
| GPCP78150 | 10 | 78 | 150 |
| GPCP82150 | 10 | 82 | 150 |
| GPCP91150 | 10 | 91 | 150 |
| GPCP107150 | 10 | 107 | 150 |
| GPCP117150 | 10 | 117 | 150 |
| GPCP127150 | 10 | 127 | 150 |
| GPCP152150 | 10 | 152 | 150 |
Diamond Core Drilling Accessories & Adaptors
Accessories to fit our Premium Dry Diamond Core Bits.
- Hex Adaptor – A ½” Hex with ½” BSP (male) thread, for use with a standard core drill
- SDS Adaptor – An SDS Plus with ½” BSP (male) thread, for use with an SDS-Plus drill, when in rotary mode only
- Extension – ½” BSP thread extension rod used where there is need for a deeper hole
- Pilot Drill – Morse taper TCT masonry drill bit used to prevent the core drifting
- Pilot Rod – Used once a hole has been drilled to prevent the core drifting
- Taper Drift – Used for knocking taper tools out of spindles and sockets.
| Code | Overall length (mm) | (mm) |
|---|---|---|
| DCAS115P | 115 | – |
| DCPD13210 | 210 | 13 |
| DCPR225 | 225 | 12 |
| DCAH88P | 88 | – |
| DCAH240P | 240 | – |
| DCAS240P | 240 | – |
| DCE240P | 240 | – |
| DCTD | 75 | – |
Diamond Core Kits
Five of the most popular sizes with all the accessories required in a aluminium case.
MUST BE USED ON ROTARY MODE ONLY.
Ideally suited to lightweight building materials, ordinary facing brickwork and blockwork up to 10n/mm2; General concrete, Soft bricks, Lightweight blocks, Natural Stone, Limestone etc.
| Code | Segment height (mm) |
|---|---|
| PDCK5 | 10 |