ADDAX Screwdriver Bits
For drilling large diameter holes in softwood and hardwood.
Pozi Bits
A wide range of Pozi driver bits available in a wide range of sizes.
| Code | Length (mm) | Type |
|---|---|---|
| 1CB25PACK | 25 | PZ 1 |
| 2CB25PACK | 25 | PZ 2 |
| 3CB25PACK | 25 | PZ 3 |
| 4CB25PACK | 38 | PZ 4 |
| 1CB25GJ | 25 | PZ 1 |
| 2CB25GJ | 25 | PZ 2 |
| 3CB25GJ | 25 | PZ 3 |
| 2CB25TUB | 25 | PZ 2 |
| 3CB25TUB | 25 | PZ 3 |
| 1CB50PACK | 50 | PZ 1 |
| 2CB50PACK | 50 | PZ 2 |
| 3CB50PACK | 50 | PZ 3 |
| 2CB50GJ | 50 | PZ 2 |
| 2CB50TUB | 50 | PZ 2 |
| 2CB100GB | 100 | PZ 2 |
| 2CB150GB | 150 | PZ 2 |
| 2CB300GB | 300 | PZ 2 |
Phillips Bits
Addax Phillips driver bits available in wide range of sizes and finishes.
| Code | Length (mm) | Type |
|---|---|---|
| 2PH25PACK | 25 | PH 2 |
| 3PH25PACK | 25 | PH 3 |
| 2PH25GJ | 25 | PH 2 |
| 2PH25TUB | 25 | PH 2 |
| 2PH50PACK | 50 | PH 2 |
| 3PH50PACK | 50 | PH 3 |
| 2PH50GJ | 50 | PH 2 |
| 2PH50TUB | 50 | PH 2 |
| 2PH100GB | 100 | PH 2 |
| 2PH150GB | 150 | PH 2 |
| 2PH300GB | 300 | PH 2 |
TM Drive Bits
Addax TIM Drive driver bits are available in a variety of sizes in Grey Phosphate.
| Code | Length (mm) | Type |
|---|---|---|
| 10TX25PACK | 25 | T10 |
| 15TX25PACK | 25 | T15 |
| 20TX25PACK | 25 | T20 |
| 25TX25PACK | 25 | T25 |
| 30TX25PACK | 25 | T30 |
| 40TX25PACK | 25 | T40 |
| 30TX25GJ | 25 | T30 |
| 30TX25TUB | 25 | T30 |
| 30TX50PACK | 50 | T30 |
| 30TX50GJ | 50 | T30 |
| 30TX50TUB | 50 | T30 |
V5 Impact Bits
V5 steel has been specifically designed to withstand the extreme pressures of an impact driver.
This durable hardened and patented bit will extend the lifespan and gives optimum performance in all impact applications.
| Code | Length (mm) | Type |
|---|---|---|
| 1CB25V5 | 25 | PZ 1 |
| 1CB50V5 | 50 | PZ 1 |
| 3CB50V5 | 50 | PZ 3 |
| 1PH25V5 | 25 | PH 1 |
| 20TX25V5 | 25 | T20 |
| 25TX25V5 | 25 | T25 |
| 40TX25V5 | 25 | T40 |
| 30TX25V5 | 50 | T30 |
Magnetic Adaptors
Addax magnetic adaptors are available in a variety of high quality finishes and sizes, including stainless steel.
| Code | Length (mm) | Type |
|---|---|---|
| 60MACB | 60 | 2 Piece with Circlip |
| 150MACB | 150 | 2 Piece with Circlip |
| 300MACB | 300 | 2 Piece with Circlip |
| 60MAB | 60 | 2 Piece CR-V |
| 60MASSB | 60 | – |
| 60MASSCB | 60 | 1 Piece SS with Circlip |
| 60MAJ | 60 | 2 Piece |
| 60MACJ | 60 | 2 Piece with Circlip |
| 60MAQRB | 150 | 2 Piece |
| 150MAQRB | 150 | 2 Piece |
| 300MAQRB | 300 | 2 Piece |
| 60MAQRJ | 60 | 1 Piece |
| 80MASDSCB | 80 | SDS Plus |
X6 Impact Bits
This new generation of impact driver technology has embraced the very latest in metallurgy research.
The metal composition has been designed to handle the most demanding impact driving applications and optimum durability and unbeatable break resistance. Made for Impact Drivers 10x Longer Life.
| Code | Length (mm) | Type | Pack Qty |
|---|---|---|---|
| 1PH25X6 | 25 | PZ 1 | 10 |
| 3PH50X6 | 50 | PZ 3 | 5 |
| 25TX50X6 | 50 | T25 | 5 |
| 3PH25X6 | 25 | PH 3 | 10 |
| T4050X6 | 50 | T40 | 5 |
| PH2150X6 | 150 | PH 2 | 1 |
| PH290X6 | 90 | PH 2 | 1 |
| PZ2150X6 | 150 | PZ 2 | 1 |
| PZ290X6 | 90 | PZ 2 | 1 |
| 2SQ25X6 | 25 | Square No 2 | 10 |
| 2SQ50X6 | 50 | Square No 2 | 5 |
| PH250X6 | 50 | PH 2 | 5 |
| T4025X6 | 25 | T40 | 10 |
| PZ350X6 | 50 | PZ 3 | 5 |
| PZ125X6 | 25 | PZ 1 | 10 |
| PZ150X6 | 50 | PZ 1 | 5 |
| T2050X6 | 50 | T20 | 10 |
| T2525X6 | 25 | T25 | 10 |
| PH225X6 | 25 | PH 2 | 10 |
| PZ225X6 | 25 | PZ 2 | 10 |
| PZ250X6 | 50 | PZ 2 | 5 |
| T3025X6 | 25 | T30 | 10 |
| T3050X6 | 50 | T30 | 5 |
| PZ325X6 | 25 | PZ 3 | 10 |
| T5050X6 | 50 | T50 | 5 |
X6 Double Ended Impact Bits
The twin ended feature of this impact resistant bit doubles the driver bit life and also provides immediate back up on failure of the first driver. Made for Impact Drivers 10x Longer Life.
| Code | Size | Length (mm) | Pack Qty |
|---|---|---|---|
| 25TX65X6 | T25 x 65 | 65 | 2 |
| 2PH65X6 | No2 x 65 | 65 | 2 |
| 2PZ65X6 | No2 x 65 | 65 | 2 |
| 30TX65X6 | T30 x 65 | 65 | 2 |
| 3PH65X6 | No3 x 65 | 65 | 2 |
| 3PZ65X6 | No3 x 65 | 65 | 2 |
| 40TX65X6 | T40 x 65 | 65 | 2 |
X6 Impact Bit Sets
Mixed sets of Pozi, Phillips & TIMdrive Impact bits, available as an 11 or 28 piece sets.
11 Piece set is a convenient pocket size mixed set of 10 commonly used 25mm impact resistant bits with 1x 60mm Impact magnetic bit holder. 28 Piece set is a comprehensive mixed set of 27 commonly used 32mm impact resistant bits with 1x 60mm impact magnetic bit holder. Packed in a shock resistant case which will withstand the toughest working environments.
Made for Impact Drivers 10x Longer Life.
| Code | Size | Length (mm) | Type | Pack Qty |
|---|---|---|---|---|
| 11SETX6 | 11pc | 25 | PH2, PZ1, PZ2, PZ3, T15, T20, T25, T30 | 1 |
| 28SETX6 | 28pc | 25 | T10, T15, T20, T25, T27, T30, T40, PZ0, PZ1, PZ2, PZ3, PH0, PH1, PH2 | 1 |
X6 Magnetic Screw Holder
This impact resistant magnetic screw holder has been specifically designed for installation of flat head screws.
The sliding magnetic sleeve securely holds the screw in place to allow single handed installations in vertical or horizontal applications.
| Code | Length (mm) | Type |
|---|---|---|
| 53MSHX6 | 53mm | 1 |
X6 Quick Release Chuck
This impact resistant quick release chuck allows the user to rapidly change between multiple 1/4″ hex drive accessories.
Available in longer lengths to assist the user when working in awkward applications.
| Code | Size (mm) | Pack Qty |
|---|---|---|
| 300MAQX6 | 300 | 1 |
| 65MAQX6 | 65 | 1 |
| 150MAQX6 | 150 | 1 |
X6 Impact Magnetic Bit Holder
A high quality magnetic 1/4″ hex drive adaptor with a unique “torsion zone” that enables the bit holder to withstand the extreme pressures exerted by an impact driver.
| Code | Size (mm) | Pack Qty |
|---|---|---|
| 150MAX6 | ¼ x 150 | 1 |
| 60MAX6 | ¼ x 60 | 1 |
X6 Impact Adapter
This impact resistant quick change adaptor is used for converting a 1/4″ hex drive into a male (1/2″ or 3/8″) socket adaptor
| Code | Size (mm) | Pack Qty |
|---|---|---|
| 12IAX6 | ½ x 50 | 1 |
| 38IAX6 | ½ x 50 | 1 |
X6 Screw Guide
This impact resistant magnetic screw guide has a sliding sleeve designed so the user always drives the screw 90 degrees ensuring a flush finish.
It also has the added benefit of reducing risk to finger injury as the sleeve covers the sharp screw threads.
| Code | Size (mm) | Pack Qty |
|---|---|---|
| 75SGX6 | 75 | 1 |
X6 Quick Change Adaptor
This impact resistant quick change adaptor is used for converting an impact wrench (1/2″ or 3/8″) into a 1/4″ hex drive.
| Code | Size (mm) | Pack Qty |
|---|---|---|
| 12QCAX6 | ½ x 50 | 1 |
| 38QCAX6 | ⅜ x 50 | 1 |
X6 Quick Change Adaptor
These professional grade impact nut drivers are designed to withstand the toughest fastening applications. The powerful magnet allows for a secure grip and unyielding bit engagement.
Ideal for use on hex head screws when installed with an impact driver.
| Code | Size (mm) | Pack Qty |
|---|---|---|
| 10SDX6 | 10 x 65 | 1 |
| 13SDX6 | 13 x 65 | 1 |
| 14SDX6 | ¼ x 65 | 1 |
| 7SDX6 | 7 x 65 | 1 |
| 8SDX6 | 8 x 65 | 1 |
X6 Impact Sockets
High grade impact sockets for use in the most challenging applications. Made from high quality steel, the sockets are hardened and tempered for maximum strength and comes in a phosphate finish for greater corrosion resistance.
Ideal for use in air impact wrenches and impact drivers.
| Code | Size (mm) | Socket size | Pack Qty |
|---|---|---|---|
| 8ISHX6 | 8 x 78 | 8 | 1 |
| 21ISHX6 | 21 x 78 | 21 | 1 |
| 10ISHX6 | 10 x 78 | 10 | 1 |
| 12ISHX6 | 12 x 78 | 12 | 1 |
| 13ISHX6 | 13 x 78 | 13 | 1 |
| 14ISHX6 | 14 x 78 | 14 | 1 |
| 15ISHX6 | 15 x 78 | 15 | 1 |
| 16ISHX6 | 16 x 78 | 16 | 1 |
| 17ISHX6 | 17 x 78 | 17 | 1 |
| 18ISHX6 | 18 x 78 | 18 | 1 |
| 19ISHX6 | 19 x 78 | 19 | 1 |
| 24ISHX6 | 24 x 78 | 24 | 1 |
X6 HSS Impact Drill Bits
This durable engineering quality HSS ground drill is designed for drilling sheet metal and wood with a 1/4″ chuck impact driver.
The quick change shank can be rapidly interchanged for easy and hassle free drilling.
| Code | Pack Qty |
|---|---|
| HSSG10X6 | 1 |
| HSSG6X6 | 1 |
| HSSG5X6 | 1 |
| HSSG4X6 | 1 |
| HSSG45X6 | 1 |
| HSSG3X6 | 1 |
| HSSG35X6 | 1 |
| HSSG2X6 | 1 |
| HSSG25X6 | 1 |
| HSSG8X6 | 1 |